Terms
  • Pro-Finish® Single-Pass Blast Systems
Single-pass models use some equipment that differs from that used with standard Pro-Finish® systems. These items are shown on this page are in the "Single-Pass Pressure Vessel" drawing.

Part Number 140297 includes items 3 through 13
1 - 16 of 16 | Results Per Page | View |
1 
Request Quote Compare Items

Item #

Item Name

Drawing Reference No.

N/A Hopper with lid N/A 1
N/A Screen (not shown) N/A 1
N/A Gasket N/A 2
N/A Sure-Flo® media regulator, manual N/A 3
N/A Nipple, 1" NPT x close, HD N/A 4
N/A Tee, 1" x 1" x 1/2" NPT N/A 5
N/A Leveling bolt, 3/8" - 16 x 2", 1 ft³ (3 per assembly) N/A 6
N/A Leveling bolt, 1/2" - 13 x 2 3/4 ", 3.5 ft³ (3 per assembly) N/A 6
N/A Hose, 1" ID (Specify 1.5' for 1 ft³ vessel) N/A 7
N/A Hose, 1" ID (Specify 3.5' for 1 ft³ vessel) N/A 7
N/A Hose clamp for 1" ID hose (1 each end) N/A 8
N/A Ball valve, 1" NPT N/A 9
N/A Check valve, 1" NPT N/A 10
N/A Tee, 1" x 1" x 1/2" NPT N/A 11
N/A Pressure vessel only, 1 ft³ N/A 12
N/A MG-78 exhaust valve N/A 13
1 - 16 of 16 | Results Per Page | View |
1