Item # SGGP 18, GP Angular Shot On Omni Finishing

W Abrasives technical studies have shown that at an average of 44 HRC hardness, GP Angular-shot™ provides the optimum performance in many foundry and other cleaning applications. These studies show that the performance characteristics of GP Angular-shot™ are similar to steel shot but also have the extra initial aggressiveness of an angular material. Due to the rapid rounding of GP Angular-shot™ there is no increase in abrasive consumption or machine wear.

New product would look similar to steelmore

Unit of Measure

Specifications

Designation	N/A GP 18
Material	N/A Steel
Mesh Size	N/A 0.0278 to 0.0394 in0.710 to 1.000 mm
Screen Number	N/A 18 to 25
Shape When New	N/A Angular
Shape	N/A Round
Sieve analysis	N/A According to standard SAE J 444
Chemical analysis	N/A According to standard SAE J827 shot / J1993 grit
Micro Hardness	N/A 40 - 51 HRC
Victors	N/A 392 - 528 HV
Standard deviation	N/A ±3Rc or ± 240 HV
Microstructure	N/A Well controlled manufacturing gives die a martensitic structure that blends the iron and carbon atoms in the finest and most ideal way possible. This structure produces a homogeneity or hardness and resistance throughout the shot. Without this structure the shot would not have the resistance necessary for the applications in which it is used.
Minimum Density Measured by Alcohol Displacement	N/A > 7.3 g/cm

Specifications

Designation

Material

Mesh Size

Screen Number

Shape When New

Shape

Sieve analysis

Chemical analysis

Micro Hardness

Victors

Standard deviation

Microstructure

Minimum Density Measured by Alcohol Displacement