Omni Finishing
163 Railroad Drive
Ivyland, PA 18974

Phone: 800 220 1075
Fax: 215 953 8644
Email: info@omnifinishing.com
Print Back
W Abrasives technical studies have shown that at an average of 44 HRC hardness, GP Angular-shot™ provides the optimum performance in many foundry and other cleaning applications. These studies show that the performance characteristics of GP Angular-shot™ are similar to steel shot but also have the extra initial aggressiveness of an angular material. Due to the rapid rounding of GP Angular-shot™ there is no increase in abrasive consumption or machine wear.

New product would look similar to steel grit.

Angular when new, this grit rapidly rounds off in use and is particularly suited to general cleaning applications.
Unit of Measure

Specifications

Designation

 N/A GP 14

Material

 N/A Steel

Mesh Size

 N/A 0.0469 to 0.0555 in1.180 to 1.140 mm

Screen Number

 N/A 14 to 16

Shape When New

 N/A Angular

Shape

 N/A Round

Sieve analysis

 N/A According to standard SAE J 444

Chemical analysis

 N/A According to standard SAE J827 shot / J1993 grit

Micro Hardness

 N/A 40 - 51 HRC

Victors

 N/A 392 - 528 HV

Standard deviation

 N/A ±3Rc or ± 240 HV

Microstructure

 N/A Well controlled manufacturing gives die a martensitic structure that blends the iron and carbon atoms in the finest and most ideal way possible. This structure produces a homogeneity or hardness and resistance throughout the shot. Without this structure the shot would not have the resistance necessary for the applications in which it is used.

Minimum Density Measured by Alcohol Displacement

 N/A > 7.3 g/cm