800-220-1075
| Items |
 /Asset/steel-grit-g12.jpg SGGH 12 GH Steel Grit |
/Asset/steel-grit-g12.jpg SGGH 14 GH Steel Grit |
/Asset/steel-grit-g12.jpg SGGH 16 GH Steel Grit |
 /Asset/steel-grit-g18.jpg SGGH 18 GH Steel Grit |
/Asset/steel-grit-g18.jpg SGGH 25 GH Steel Grit |
|||||
| Description |
Cast steel angular grit is produced by crushing specially heat treated shot pellets. Its behavior characteristics in service are very much dependent upon the hardness selection of GP, GB, GL or GR grit. Having maximum hardness, GH always remains angular in its operating mix. This steel has a fast, effective, etching action, making it ideal for deep descaling and etched surface requirements. For use mainly with compressed air equipment. |
|||||||||
| Designation | GH 12 | GH 14 | GH 16 | GH 18 | GH 25 | |||||
| Formulation | GH Steel Grit | |||||||||
| Material | Steel | |||||||||
| Mesh Size | 0.0555 to 0.0661 in1.400 to 1.700 mm | 0.0469 to 0.0555 in1.180 to 1.140 mm | 0.0394 to 0.0469 in1.000 to 1.180 mm | 0.0278 to 0.0394 in0.710to 1.000 mm | 0.0165 to 0.0278 in0.425 to 0.710 mm | |||||
| Screen Number | 12 to 14 | 14 to 16 | 16 to 18 | 18 to 25 | 25 to 40 | |||||
| Shape When New | Angular | |||||||||
| Shape | Angular | |||||||||
| Sieve analysis | According to standard SAE J 444 | |||||||||
| Chemical analysis | According to standard SAE J827 shot / J1993 grit | |||||||||
| Micro Hardness | Minimum 60 HRC | |||||||||
| Victors | > 697 HV | |||||||||
| Standard deviation | ±3Rc or ± 80 HV | |||||||||
| Microstructure | Well controlled manufacturing gives die a martensitic structure that blends the iron and carbon atoms in the finest and most ideal way possible. This structure produces a homogeneity or hardness and resistance throughout the shot. Without this structure the shot would not have the resistance necessary for the applications in which it is used. | |||||||||
| Minimum Density Measured by Alcohol Displacement | > 7.3 g/cm | |||||||||
|
|
||||||||||
